Duratron® PAI

manufacturer 

Quadrant Plastic Composites AG

+ Request information
Description

Maintains strength and stiffness to 500°F (260°C)

Minimal expansion rate to 500°F (260°C)

Excellent wear resistance in bearing grades

Able to endure harsh thermal, chemical and stress conditions.

With its versatile performance capabilities and proven use in a broad range of applications, Duratron polyamide-imide (PAI) shapes are offered in extruded, injection molded, and compression molded grades.

 

Duratron PAI is the highest performing, melt processable plastic. It has superior resistance to elevated temperatures. It is capable of performing under severe stress conditions at continuous temperatures to 500°F (260°C). Parts machined from Duratron stock shapes provide greater compressive strength and higher impact resistance than most advanced engineering plastics (See Figure 22).

 

Duratron PAI's extremely low coefficient of linear thermal expansion and high creep resistance deliver excellent dimensional stability over its entire service range (see Figure 23). Duratron PAI is an amorphous material with a Tg (glass transition temperature) of 537°F (280°C). Duratron PAI stock shapes are post-cured using procedures developed jointly by BP Amoco and Quadrant. This eliminates the need for additional curing by the end user in most situations. A post-curing cycle is sometimes recommended for components fabricated from extruded shapes where optimization of chemical resistance and/or wear performance is required.

 

For large shapes or custom geometries like tubular bar, compression molded Duratron PAI shapes offer designers the greatest economy and flexibility. Another benefit of selecting a compression molded grade is that resins are cured, or "imidized" prior to molding which eliminates the need to post-cure shapes or parts fabricated from compression molded shapes.

 

Popular extrusion and injection molding grades of Duratron PAI are offered as compression molded shapes. Typically, you can identify a compression molded grade as having a second digit of "5" in the product name.

Product details
+ Request information
Contact person
Portrait of Jochen Hilbig
Jochen Hilbig standard.toggle-bookmark
Quadrant Plastic Composites AG
Related products
show all
116 116
by Pix SRL
117 117
by Pix SRL
118 118
by Pix SRL
122 122
by Pix SRL
123 123
by Pix SRL
551 551
by Pix SRL
552 552
by Pix SRL
553 553
by Pix SRL
553 V 553 V
by Pix SRL
555 555
by Pix SRL
OKE and Automotive OKE and Automotive
by OKE Kunststofftechnik GmbH & Co. KG
PLASTIC INJECTION MOULDING AT OKE PLASTIC INJECTION MOULDING AT OKE
by OKE Kunststofftechnik GmbH & Co. KG
Plastic mould steel Plastic mould steel
by Böhler Bleche GmbH & Co. KG
Ball transfer Ball transfer
by Sambon Precision Industry Co., Ltd.
Duratron® PBI Duratron® PBI
by Quadrant Plastic Composites AG
Ertalyte® PET-P Ertalyte® PET-P
by Quadrant Plastic Composites AG
KS-Plastic connecting fitting AZ 21 V ARTICLE NO. 7047 KS-Plastic connecting fitting AZ 21 V ARTICLE NO. 7047
by EB Akcesoria Meblowe Edward Banaszak
ABS 522 RAI BICOL ABS 522 RAI BICOL
by Stillemans NV/SA
senosan® PS-Polystyrene Sheets & Films senosan® PS-Polystyrene Sheets & Films
by Senoplast Klepsch & Co. GmbH