3-Ply Blockboard

manufacturer 

IBL S.p.A - BONZANO

+ Request information
Description

Composition

The core of the panel is made of poplar or spruce lumber which have been carefully dried and where the most evident wood defects have been eliminated. The core is then covered with two plies of poplar or ceiba veneer which make the panel very stable. The panel is also available with HDF or chipboard faces upon request.

Properties

  • Excellent dimensional stability due to the drying process
  • Excellent lightweight (400÷420 kg/cbm)
  • High resistance to the fasteners
  • High screw holding strength
  • Easy to cut

Certifications

Environment: PEFC™ • FSC®
Health: E1 • CARB2

Sizes

1870×3720 mm., 1855×3130 mm.,
1550×3500 mm., 1250×2500 mm.,
2050×5200 mm., 2050×2600 mm.

Thicknesses

13÷38 mm.

Quality

Poplar:B/BB (II/III) – BB/BB (III/III) – C/C
(IV/IV) UNI EN 635-1 and 635-2 standards
HDF
Ceiba: B/BB (II/III)

Bonding

Classe 1,2,3 – Norma UNI EN 314

Product details
+ Request information
Contact person
Portrait of Veronica Durante
Veronica Durante standard.toggle-bookmark Marketing
IBL S.p.A - BONZANO
Related products
show all
3 layer panels 3 layer panels
by Gizia S.r.l.
CRISTALWOOD panels CRISTALWOOD panels
by Gizia S.r.l.
Multi layer panels Multi layer panels
by Gizia S.r.l.
Lamyply and Block Board Lamyply and Block Board
by Archidply Industries Ltd.
MR Grade Block Board MR Grade Block Board
by Archidply Industries Ltd.
Teak Block Board Teak Block Board
by Archidply Industries Ltd.
BLOCK BOARD IS: 1659 BLOCK BOARD IS: 1659
by Virgo Industries
Veneered boards Veneered boards
by ROHOL Vertriebs GmbH
Technical plywood Technical plywood
by ROHOL Vertriebs GmbH